Call Our Experts Today: (778) 600-1787

Call: (778) 600-1787

REQUEST SERVICE

Call: (778) 600-1787

REQUEST SERVICE

Dryer Repair
Langley

With expertise in diagnosing and fixing issues like heating problems, drum malfunctions, and more, we offer prompt, dependable service to keep your laundry tasks on track.

REQUEST SERVICE

Dryer Repair
Langley

With expertise in diagnosing and fixing issues like heating problems, drum malfunctions, and more, we offer prompt, dependable service to keep your laundry tasks on track.

Call: (778) 600-1787

Dryers use a fuel source to heat the air – a motor to rotate the drum and a fan to circulate the hot air to dry your clothes. But a dryer breakdown can have a direct impact on the efficiency of your appliance. The team at Langley Appliance Repair can assist with your repair needs.

Dryers, like other household machines, are complicated appliances requiring professional assistance when they malfunction. Langley Appliance Repair specialists use the right tools to repair and restore your dryers to their prior operating conditions.

Call: (778) 600-1787
At Langley Appliance Repair, we care for all your repair needs!

Loud Noise or Vibration

One of the main concerns many have is when the dryer makes loud noises or vibrations. Our technicians will inspect the dryer if it makes too much noise. The problem is likely because of a broken belt, a faulty drum roller, or a dryer blower.

Call: (778) 600-1787

Drive Belt

A drive belt helps rotate the drum during a dry cycle. When your dryer works, the belt is under a lot of stress, leading to wear & tear or breakages. If your machine makes too much noise, it is time to replace the drive belt.

Dryer Blower

A blower circulates air by pushing hot air out of the vent. If your dryer makes too much noise, vibrates, or dries clothes for a long time, you may need to replace your blower.

Dryer Drum Roller

A roller drum keeps the drum in place during the dry cycle. The roller drum must be inspected when the dryer makes too much noise. Depending on the situation, you may need to replace just one or all the rollers.
Call: (778) 600-1787

No Heat

You may need dryer repair services when the dryer is working but not producing heat. The concern is usually with a blown fuse or a faulty heating element. Sometimes, you may need to replace the main control board to resolve the issue, but Langley Appliance Repair is here to handle your repair needs.

Heating Element

A heating element heats the air in the drum to help clothes dry. If the heating system is damaged, your dryer may be unable to heat. The heating element can be repaired or replaced as needed.

Thermal Fuse

A thermal fuse is a safety device that prevents the dryer from overheating. If the fuse has blown out, it can prevent the heating element from working properly. If the dryer doesn’t heat, the fuse may need to be replaced.

Igniter and Flame Sensor

The dryer igniter is on the side of the gas burner, and the flame sensors are across from the igniters. The dryer will not heat if the sensors are broken or the igniters are faulty. Professional help may be needed to replace these dryer components for a working machine.

Call: (778) 600-1787

Won’t Spin?

This is a common problem with dryers. There are various reasons why your dryer may not spin. Try turning the drum by hand; if it spins easily, the belt is probably broken or slipped off. Sometimes, the motor is faulty, and the dryer won’t turn.

Drum Belt

Check if the drum belt is broken by simply spinning the drum. If it rotates too quickly, the belt is likely damaged. You should always inspect the belt for signs of wear and tear and replace it if necessary.

Drum Slides

Located at the front of the drum, drum slides support and guide the dryer drum to spin. Worn-out drum slides can lead to too much friction causing the motor not to work. These must be inspected and replaced as a set if they are damaged.

Drum Roller

Your dryer may have more than one drum roller. Damage to the rollers can make it difficult for the drum to spin and places excess stress on the motor. If the drum doesn’t turn freely or evenly when spinning by hand, you may have to replace the drum rollers.

Drum Bearing

A drum bearing is essential for the working of a dryer and is located at the back of the drum. Remove the drive belt and spin the drum by hand. If you feel or hear a grinding noise, your drum bearings are faulty. Inspect and do the necessary replacement for your dryer to work again.
Call: (778) 600-1787

Won’t Start

There are many reasons your dryer may not turn on. It could be that a thermal fuse is damaged or an issue with the door switch and more. Call Langley Appliance Repair for a dryer repair service if you have any problems.

Thermal Fuse

Located near the dryer’s heat source, the thermal fuse protects your dryer from overheating. This is the most common dryer problem that many people have. A blown thermal fuse could indicate that your dryer vent is clogged. Clean the vent before starting the dryer again.

Door Switch

The clicking noise you hear when you close your dryer door is the door switch. If the door switch clicks when you press it, it is functioning. You’ll need to replace the door switch if there’s no click.

Start Switch

If the start switch is faulty, your dryer won’t work. Test this by turning on the dryer. If the dryer makes a humming sound but does not start, your “Start” switch is working. If there is no noise, then the button may be defective. Test with a multimeter. If there is no continuity, it is time to replace the switch.

Drive motor

A drive motor is essential as it makes the dryer’s drum turn and the blower wheel work. Check the drive motor if the dryer doesn’t turn on. Remove the dryer belt and verify that the blower wheel is clear of any blocks.
Call: (778) 600-1787

Takes A Long Time to Dry

One of the most common complaints about a dryer is that it takes too long to dry clothes. There can be many reasons, like an issue with the airflow, a clogged vent with restricted air circulation, or a faulty blower wheel. The technicians at Langley Appliance Repair will inspect and repair your dryer to ensure its full functionality.

Air Flow

A clogged exhaust vent can cause your dryer to malfunction. Too much moisture can remain inside the machine. Inspect your dryer vents manually.

Blower Wheel

The blower wheel is essential as it takes warm air from the coil and pushes it into the drum for the clothes to dry. Remove the vents and check the power of the airflow to see if the blower wheel is defective. The blower wheel should not wobble when rotated by hand.

Lint Filter

The first thing to check is your lint filter. A lint filter is a filter that catches particles of lint. These particles accumulate on the screen and must be removed after each dryer use. Langley Appliance Repair will ensure the lint screens are clean and the dryer is in working condition.

Heating Element

The heating element and coil heat the air in the dryer. The heating element must be cleaned or replaced if the coil burns out or is damaged.

Langley Appliance Repair is available throughout Langley and British Columbia. Our technical experts inspect your dryer in detail and discuss your options in detail– they then provide repairs, installations and replacements accordingly.

Call: (778) 600-1787

To get started, call us today at (778) 600-1787.

LET’S CONNECT

(778) 600-1787
service@langleyappliancesrepair.ca

OPEN HOURS

Mon-Fri: 8AM-6PM
Saturday: 10AM-6PM
Sunday: 10AM-6PM

 

QUICK LINKS:

Home
About
Appliance Repairs
Brands
Contact

LET’S CONNECT

(778) 600-1787
service@langleyappliancesrepair.ca

OPEN HOURS
Mon-Fri: 8AM-6PM
Saturday: 10AM-6PM
Sunday: 10AM-6PM

QUICK LINKS:

Home
About
Appliance Repairs
Brands
Contact

© 2025 Langley Appliances Repair All Rights Reserved | Privacy Policy | Sitemap